Raster chart image of: NZ 5125 Bay of Islands This data was compiled for the use at the following scale: 1:7000 File reference: NZ512502.tif THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION. The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and...

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west. Relief layers were generated for each sheet, and specifically for use in the Topo250 map series. There may be subtle differences in the relief shading of adjacent map sheets. The Topo50 map series provides...

Raster chart image of: NZ 5423 Approaches to Whakaari / White Island This data was compiled for the use at the following scale: 1:50000 File reference: NZ542301.tif THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION. The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational...

Raster chart image of: NZ 5312 Whangapoua Harbour This data was compiled for the use at the following scale: 50000 File reference: NZ531202.tif THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION. The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and...

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale. Along with the paper-based Topo50 map series, digital images of the maps are also publicly available. Georeferenced raster digital images are provided at a resolution of 300 DPI....

The Auckland 1946 to NZVD2016 Conversion Raster provides users with a two arc-minute (approximately 3.6 kilometres) raster image of the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016). The conversion value is represented by the attribute “O”, in metres. This conversion...

The New Zealand Quasigeoid2009 (NZGeoid2009) can be used to convert GPS derived ellipsoidal heights to New Zealand Vertical Datum 2009 (NZVD2009) normal-orthometric heights that relate more closely to mean sea level and the local gravity field. NZGeoid2009 can also be used to transform heights to any of the 13 official local vertical datums used across...

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west. Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information...

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale. The Bounty Island data and map, although captured and presented at 1:25,000 scale is, to all intents and purposes, part of the Topo50 series. Along with the paper-based Topo50 map...

The Ant50 map series provides topographic mapping within the Ross Dependency, Antarctica Digital images of the maps are also publicly available from http://www.linz.govt.nz/topography/topo-maps/antarctic-topo50-map-series Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and...

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale. For Tokelau the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series. Along...

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale. For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map...

Raster chart image of: NZ 14903 Approaches to Scott Island This data was compiled for the use at the following scale: 1:75000 File reference: NZ1490301 THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION. The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts...

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west. Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information...

Raster chart image of: NZ 14065 Ross Sea to New Zealand This data was compiled for the use at the following scale: 1:10000000 File reference: NZ1406501 THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION. The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts...

Raster chart image of: NZ 14903 Approaches to Scott Island: Scott Island This data was compiled for the use at the following scale: 1:25000 File reference: NZ1490302 THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION. The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational...

The Ant50 map series provides topographic mapping within the Ross Dependency, Antarctica Digital images of the maps are also publicly available from http://www.linz.govt.nz/topography/topo-maps/antarctic-topo50-map-series Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and...

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west. Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information...

This layer contains the DSM for LiDAR data from the Hawarden area captured in 2015. The DEM is available as layer Canterbury - Hawarden LiDAR 1m DEM (2015). The index tiles are available as layer Canterbury - Hawarden LiDAR Index Tiles (2015). The LAS point cloud and vendor project reports are available from OpenTopography. Lidar was captured for...

This layer contains the DSM for LiDAR data from the Hurunui District captured in 2013. The DEM is available as layer Canterbury - Hurunui Rivers LiDAR 1m DEM (2013). The index tiles are available as layer Canterbury - Hurunui Rivers LiDAR Index Tiles (2013). The LAS point cloud and vendor project reports are available from OpenTopography. Lidar was...