28 datasets found

  • GWRC 1m contours 2020 BP32 (Paraparaumu)

    Greater Wellington Regional Council
    1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020. Area of 50k topo sheet BP32 (Paraparaumu). Base DEM is the 2013 WAGGIS LIDAR regional DEM, reprocessed in 2017 by Landcare Research for LINZ. Additional, mainly later, DEMs have been mosaiced in to replace the regional DEM, for this sheet based off...
    Created 2 February 2022 Updated 2 February 2022
  • GWRC 1m contours 2020 BP34 (Masterton)

    Greater Wellington Regional Council
    1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020. Vertical datum is NZVD2016. Area of 50k topo sheet BP34 (Masterton). 1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020.  Base DEM is the 2013 WAGGIS LIDAR regional DEM, reprocessed in 2017 by...
    Created 2 February 2022 Updated 2 February 2022
  • GWRC 1m contours 2020 BN32 (Kapiti Island)

    Greater Wellington Regional Council
    1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020. Base DEM is the 2013 WAGGIS LIDAR regional DEM, reprocessed in 2017 by Landcare Research for LINZ. Additional, mainly later, DEMs have been mosaiced in to replace the regional DEM, based off data from KCDC (2017). Original region-wide 2013 LIDAR data...
    Created 2 February 2022 Updated 2 February 2022
  • Wellington Region 5m Contours

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 2 February 2022 Updated 2 February 2022
  • GWRC 1m contours 2020 BP31 (Porirua)

    Greater Wellington Regional Council
    1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020. Area of 50k topo sheet BP31 (Porirua). Base DEM is the 2013 WAGGIS LIDAR regional DEM, reprocessed in 2017 by Landcare Research for LINZ. Additional, mainly later, DEMs have been mosaiced in to replace the regional DEM, for this sheet based off data...
    Created 2 February 2022 Updated 2 February 2022
  • GWRC 1m contours 2020 BQ33 (Lake Wairarapa)

    Greater Wellington Regional Council
    1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020. Area of 50k topo sheet BQ33 (Lake Wairarapa). Base DEM is the 2013 GWRC/WAGGIS LIDAR regional DEM, reprocessed in 2017 by Landcare Research for LINZ.  Original region-wide 2013 LIDAR data captured at 1.3 points per square metre, to an accuracy of...
    Created 2 February 2022 Updated 2 February 2022
  • GWRC 1m contours 2020 BP33 (Featherston)

    Greater Wellington Regional Council
    1m elevation contours based off a composite bare-earth LIDAR DEM of Wellington Region, New Zealand, 2020. Base DEM is the 2013 WAGGIS LIDAR regional DEM, reprocessed in 2017 by Landcare Research for LINZ. Original region-wide 2013 LIDAR data captured at 1.3 points per square metre, to an accuracy of +/- 0.15m (1 sigma) in 2013-2014.Vertical datum is...
    Created 2 February 2022 Updated 2 February 2022
  • Wellington Region 5m Contours

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BQ33

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BN32ptBP32

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BP34

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BQ32

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BP32

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BN36

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BN35

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BP36

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BN37

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BQ35

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BQ34

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
  • GWRC Contours 5m - Sheet BN33

    Greater Wellington Regional Council
    Contours at 5 metre vertical interval for the land area of the Greater Wellington Region. Created using automated tools based off a 1m cell size DEM which was created from LIDAR data analysis. Contours have been simplified to remove excessive numbers of vertices in the linework. Data clipped by Topo50 map sheet extents. Original LIDAR data captured at 1.3...
    Created 6 February 2020 Updated 2 September 2020
You can also access this registry using the API (see API Docs).